Objective: Road traffic suicides typically involve a passenger car driver crashing his or her vehicle into a heavy vehicle, because death is almost certain due to the large mass difference between these vehicles. For the same reason, heavy-vehicle drivers typically suffer minor injuries, if any, and have thus received little attention in the research literature. In this study, we focused on heavy-vehicle drivers who were involved as the second party in road suicides in Finland.
Methods: We analyzed 138 road suicides (2011–2016) involving a passenger car crashing into a heavy vehicle. We used in-depth road crash investigation data from the Finnish Crash Data Institute.
Results: The results showed that all but 2 crashes were head-on collisions. Almost 30% of truck drivers were injured, but only a few suffered serious injuries. More than a quarter reported sick leave following their crash. Injury insurance compensation to heavy-vehicle drivers was just above €9,000 on average. Material damage to heavy vehicles was significant, with average insurance compensation paid being €70,500. Three out of 4 truck drivers reported that drivers committing suicide acted abruptly and left them little opportunity for preventive action.
Conclusions: Suicides by crashing into heavy vehicles can have an impact on drivers’ well-being; however, it is difficult to see how heavy-vehicle drivers could avoid a suicide attempt involving their vehicle. 相似文献
ABSTRACT Refrigerant pressure drop and temperature change in pipes are normally ignored in the thermodynamic analysis of traditional vehicle air conditioning system, this will result in serious errors. In this Paper, pressure drop and temperature difference are simulated in different pipes of electric vehicle (EV) heat pump system to analysis the effects of pipes in the actual EV heat pump system. The results indicate that the greater the mass flow, the faster pressure drop increases, the temperature difference decreases. Pressure drop of saturated liquid refrigerant is smaller than that of saturated gas refrigerant at the same saturation pressure and mass flow rate. The higher the refrigerant pressure (no phase change), the slower pressure drop decreases, the faster the temperature difference decreases. Pressure drop decreases with the increment of bending angle of the pipe. For EV heat pump system, suitable valves and less branches are helpful for energy saving of the system. Shortening the pipe between compressor and condenser can reduce temperature change obviously. Pressure drop per unit length in the pipe between evaporator and compressor is large especially in heating mode because of lower refrigerant density. It even reaches to over 100 times of that in the pipe between condenser and throttle valve in heating mode and has negative effects on the performance of the system. If the evaporator is closer to the compressor and the number of branches is less, then pressure drop will decrease a lot, which will be advantageous for energy saving of the heat pump system. 相似文献
In this paper, the inventory-routing problem is studied for a closed-loop supply chain. This closed-loop supply chain considers suppliers, manufacturers, whole-sellers, and disposal centers. To formulate this problem, a mixed integer linear programming model is proposed. This mathematical model minimizes the total costs of the supply chain, including the fixed and variable costs of vehicles, and holding inventory costs of final products and scraps. The proposed model considers the road roughness degree, multi-path setting and the heterogeneous fleet of vehicles, which increases its flexibility and the quality of solutions. Then, two symmetry-breaking constraints are proposed to reduce the complexity of the mathematical model. In order to evaluate the integrity of the proposed model, 20 instances of different sizes are randomly generated and solved. Finally, a comprehensive sensitivity analysis is conducted with respect to five key features of the problem, such as the impact of the symmetry-breaking constraints on the CPU time, multi-path setting, fixed cost of vehicles, heterogeneous fleet of vehicles, and lost sales. The results indicate that the consideration of multi-path setting and the heterogeneous fleet of vehicles improves the quality of solutions significantly. 相似文献
Objectives: Nationally, animal–motor vehicle crashes (AVCs) account for 4.4% of all types of motor vehicle crashes (MVCs). AVCs are a safety risk for drivers and animals and many National Park Service (NPS) units (e.g., national park, national monument, or national parkway) have known AVC risk factors, including rural locations and substantial animal densities. We sought to describe conditions and circumstances involving AVCs to guide traffic and wildlife management for prevention of AVCs in select NPS units.
Methods: We conducted an analysis using NPS law enforcement MVC data. An MVC is a collision involving an in-transit motor vehicle that occurred or began on a public roadway. An AVC is characterized as a collision between a motor vehicle and an animal. A non-AVC is a crash between a motor vehicle and any object other than an animal or noncollision event (e.g., rollover crash). The final data for analysis included 54,068 records from 51 NPS units during 1990–2013. Counts and proportions were calculated for categorical variables and medians and ranges were calculated for continuous variables. We used Pearson’s chi-square to compare circumstances of AVCs and non-AVCs. Data were compiled at the park regional level; NPS parks are assigned to 1 of 7 regions based on the park’s location.
Results: AVCs accounted for 10.4% (5,643 of 54,068) of all MVCs from 51 NPS units. The Northeast (2,021 of 5,643; 35.8%) and Intermountain (1,180 of 5,643; 20.9%) regions had the largest percentage of the total AVC burden. November was the peak month for AVCs across all regions (881 of 5,643; 15.6%); however, seasonality varied by park geographic regions. The highest counts of AVCs were reported during fall for the National Capital, Northeast/Southeast, and Northeast regions; winter for the Southeast region; and summer for Intermountain and Pacific West regions.
Conclusions: AVCs represent a public health and wildlife safety concern for NPS units. AVCs in select NPS units were approximately 2-fold higher than the national percentage for AVCs. The peak season for AVCs varied by NPS region. Knowledge of region-specific seasonality patterns for AVCs can help NPS staff develop mitigation strategies for use primarily during peak AVC months. Improving AVC data collection might provide NPS with a more complete understanding of risk factors and seasonal trends for specific NPS units. By collecting information concerning the animal species hit, park managers can better understand the impacts of AVC to wildlife population health. 相似文献
Through a sensitivity analysis, the trade-off between vehicle range and CO2 emissions is investigated as a function of electric emissions coefficient. Various powertrains were analysed for use in a small crossover sport utility vehicle. Gasoline, gasoline electric hybrid, diesel, fuel cell and battery electric vehicles (BEVs) were considered. Using various upstream fuel pathways and a model for vehicle performance, emissions and energy use were estimated. The hydrogen fuel cell vehicle was found preferable to BEVs under conditions of high CO2 emissions per kW-hr and a high vehicle range requirement. The BEV was preferable for all other conditions. 相似文献
Refuse trucks play an important role in the waste collection process. Due to their typical driving cycle, these vehicles are characterized by large fuel consumption, which strongly affects the overall waste disposal costs. Hybrid hydraulic refuse vehicles offer an interesting alternative to conventional diesel trucks, because they are able to recuperate, store and reuse braking energy. However, the expected fuel savings can vary strongly depending on the driving cycle and the operational mode. Therefore, in order to assess the possible fuel savings, a typical driving cycle was measured in a conventional vehicle run by the waste authority of the City of Stuttgart, and a dynamical model of the considered vehicle was built up. Based on the measured driving cycle and the vehicle model including the hybrid powertrain components, simulations for both the conventional and the hybrid vehicle were performed. Fuel consumption results that indicate savings of about 20% are presented and analyzed in order to evaluate the benefit of hybrid hydraulic vehicles used for refuse collection. 相似文献